Palm Cell Phone Accessories 185 10441 00 User Manual

Battery Charger  
 
Treo750 smartphone batteries  
Introduction  
The Palm® Battery Charger is a convenient,  
pocket-sized travelers charger for various  
Palm® smartphone batteries, including the  
following:  
NOTE For a complete list of compatible  
smartphone batteries, go to  
Working with the AC charger that came  
with your smartphone or another power  
supply approved by Palm, the Battery  
Charger ensures that your smartphone  
battery is ready to use whenever you need  
it.  
Treo650 smartphone batteries  
Treo680 smartphone batteries  
Treo700p smartphone batteries  
Treo700w smartphone batteries  
Treo700wx smartphone batteries  
I N T R O D U C T I O N  
1
 
4
Connect the AC charger that came with  
your smartphone to the Battery Charger  
so that the white triangles are aligned.  
Using your Battery  
Charger  
NOTE Connecting other power supplies to  
the Battery Charger may damage or  
destroy your smartphone battery. Use only  
power supplies that are approved by Palm.  
For more information, go to  
To charge a smartphone battery with your  
Battery Charger, do the following:  
1
2
With your thumb and index finger on  
each side of the lid, open the Battery  
Charger.  
5
Connect the AC charger to a wall outlet.  
Insert a smartphone battery into the  
Battery Charger so that the battery  
contacts align with the contacts in the  
Battery Charger.  
6
Check the indicator light to confirm that  
the smartphone battery is being  
charged.  
3
Close the lid until it lightly snaps shut.  
Solid red indicates that your  
smartphone battery is being charged.  
U S I N G  
B A T T E R Y C H A R G E R  
Y O UDRownload from Www.Somanuals.com. All Manuals Search And Download.  
2
Solid green indicates that your  
smartphone battery is charged.  
Power Charger, or another power supply  
approved by Palm.  
Flashing yellow indicates that the  
battery being charged has become too  
hot or too cold to safely charge. Move  
the Battery Charger to a location that is  
at room temperature.  
CAUTION Do not use power supplies that  
are not approved by Palm. They could  
damage the Battery Charger or the battery  
being charged and may cause personal  
injury.  
Solid yellow indicates a damaged  
battery or a power-supply error.  
Don’t use the Battery Charger in areas  
where sparks could pose a hazard.  
CAUTION If the indicator light is solid  
yellow, immediately disconnect your  
Battery Charger. Be sure you are using a  
functional Palm smartphone battery as well  
as a functional Palm power supply.  
Don’t let the Battery Chargers metal  
contacts or electrical socket come in  
contact with metal objects.  
Keep the metal contacts and the  
electrical socket on the Battery Charger  
clean and free from debris that could  
obstruct charging or could cause a short  
circuit.  
NOTE For additional troubleshooting  
information for your Battery Charger, go to  
Don’t expose the Battery Charger or  
your spare batteries to rain or other  
liquids.  
Caring for your  
Battery Charger  
Avoid using the Battery Charger at high  
temperatures (above 60°C/134°F), such  
as in a hot vehicle or in direct sunlight.  
General information  
Use only the AC charger that came with  
your smartphone, a Palm® Vehicle  
C A R I N G F O R  
C H A R G E R  
Download from Www.Somanuals.com. All Manuals SearchYAOnUdRDBowA TnlToEaRdY.  
3
Battery safety and disposal information  
CAUTION Burning a battery may cause an  
explosion and personal injury.  
Keep the metal contacts on the battery  
clean.  
Be sure to dispose of your battery in an  
environmentally responsible and legal  
way.  
Don’t attempt to disassemble or  
short-circuit the battery.  
CAUTION To avoid being burned, don’t  
handle a damaged or leaking lithium-ion  
(Li-ion) battery.  
NOTE In some areas, the disposal of  
batteries in household or business trash  
may be prohibited. For battery disposal  
environment.  
Never dispose of a battery by  
incineration.  
C A R I N G  
C H A R G E R  
F ODRoYwOnlUoRadBfAroTmT EWRwY w.Somanuals.com. All Manuals Search And Download.  
4
written approval may void the users authority to operate this  
equipment.  
Important safety and  
legal information  
Responsible party:  
Palm, Inc.  
950 W. Maude Avenue  
Sunnyvale, CA 94085-2801  
United States of America  
(408) 617-7000  
FCC statement  
This device complies with part 15 of the FCC rules. Operation is  
subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2) this  
device must accept any interference received, including interference  
that may cause undesired operation.  
This equipment has been tested and found to comply with the limits  
for a Class B digital device, pursuant to Part 15 of the FCC rules.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment  
generates, uses, and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
Smartphone Cradle  
Tested to Comply  
With FCC Standard  
FOR HOME OR OFFICE USE  
Canadian ICES-003 statement  
This Class B digital apparatus meets all requirements of the Canadian  
Interference-Causing Equipment Regulations.  
Reorient or relocate the receiving antenna.  
Cet appareil numérique de la classe B respecte toutes les exigences  
du Réglement sur le matériel brouilleur du Canada.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
The use of shielded I/O cables is required when connecting this  
equipment to any and all optional peripheral or host devices. Failure  
to do so may violate FCC rules.  
CE compliance statement  
This product was tested by Palm, Inc. and found to comply with all  
the requirements of the EMC Directive 89/336/EEC as amended.  
IMPORTANT Changes or modifications not covered in this manual  
must be approved in writing by the manufacturers Regulatory  
Engineering Department. Changes or modifications made without  
I M P O R T A N T S A F E T Y A N D  
I N F O R M A T I O N  
Download from Www.Somanuals.com. All Manuals Search AndLDEoGwAnLload.  
5
cradle, or connecting it to any other device. You can do this in many  
ways, including the following:  
Static Electricity, ESD, and Your Palm Device  
Electrostatic discharge (ESD) can cause damage to electronic devices  
if discharged into the device, so you should take steps to avoid such  
an occurrence.  
Ground yourself when you're holding your device by  
simultaneously touching a metal surface that is at earth ground.  
For example, if your computer has a metal case and is plugged  
into a standard three-prong grounded outlet, touching the case  
should discharge the ESD on your body.  
Description of ESD Static electricity is an electrical charge caused by  
the buildup of excess electrons on the surface of a material. To most  
people, static electricity and ESD are nothing more than annoyances.  
For example, after walking over a carpet while scuffing your feet,  
building up electrons on your body, you may get a shock—the  
discharge event—when you touch a metal doorknob. This little shock  
discharges the built-up static electricity.  
Increase the relative humidity of your environment.  
Install ESD-specific prevention items, such as grounding mats.  
Conditions that enhance ESD occurrences Conditions that can  
contribute to the buildup of static electricity in the environment  
include the following:  
ESD-susceptible equipment Even a small amount of ESD can harm  
circuitry, so when working with electronic devices, take measures to  
help protect your electronic devices, including your Palm® device,  
from ESD harm. While Palm has built protections against ESD into its  
products, ESD unfortunately exists and, unless neutralized, could  
build up to levels that could harm your equipment. Any electronic  
device that contains an external entry point for plugging in anything  
from cables to docking stations is susceptible to entry of ESD.  
Devices that you carry with you, such as your Palm device, build up  
ESD in a unique way because the static electricity that may have built  
up on your body is automatically passed to the device. Then, when  
the device is connected to another device such as a docking station, a  
discharge event can occur.  
Low relative humidity.  
Material type. (The type of material gathering the charge. For  
example, synthetics are more prone to static buildup than natural  
fibers like cotton.  
The rapidity with which you touch, connect, or disconnect  
electronic devices.  
While you should always take appropriate precautions to discharge  
static electricity, if you are in an environment where you notice ESD  
events, you may want to take extra precautions to protect your  
electronic equipment against ESD.  
Precautions against ESD Make sure to discharge any built-up static  
electricity from yourself and your electronic devices before touching  
an electronic device or connecting one device to another. The  
recommendation from Palm is that you take this precaution before  
connecting your Palm device to your computer, placing a device in a  
PN: 185-10441-00  
I M P O R T A N T S A F E T Y  
L E G A L  
Download fAroNmD Www.SoImNaFnOuRaMls.AcToImO.NAll Manuals Search And Download.  
6

Miele Vacuum Cleaner S 5980 User Manual
Milan Technology Network Router MIL W2332G User Manual
Moxa Technologies Switch Uport 1200 1400 1600 User Manual
National Instruments Computer Hardware 1141 User Manual
NEC Car Video System LCD2090UXi User Manual
NEC Projector MultiSync LT 80 User Manual
NewAir Air Conditioner ACP 1300E User Manual
Nortel Networks Switch 50 Series User Manual
OPPO Digital Blu ray Player BDP 93 User Manual
Panasonic Camera Lens H FS014042 User Manual