Palm 3404WW User Manual

Battery Charger  
Using the Battery Charger and the AC  
charger that came with your smartphone or  
another power supply approved by Palm,  
you can be sure that your smartphone  
battery is ready to use whenever you  
need it.  
Introduction  
The Palm® Battery Charger is a convenient,  
pocket-sized travelers charger for various  
Palm® smartphone batteries.  
NOTE To find compatible smartphone  
batteries, go to www.palm.com.  
I N T R O D U C T I O N  
3
5
6
Connect the AC charger to a wall outlet.  
Using your Battery  
Charger  
Check the indicator light to confirm that  
the smartphone battery is being  
charged.  
To charge a smartphone battery with your  
Battery Charger, do the following:  
1
Grasping both sides of the lid, open the  
Battery Charger.  
2
Insert a smartphone battery into the  
Battery Charger so that the battery  
contacts align with the contacts in the  
Battery Charger.  
3
4
Close the lid until it lightly snaps shut.  
Use the AC charger  
included with your  
smartphone  
Connect the battery charger to the AC  
charger that came with your  
smartphone.  
NOTE Connecting other power supplies to  
the Battery Charger may damage or  
destroy your smartphone battery. Use only  
power supplies that are approved by Palm.  
For more information, go to  
U S I N G Y O U R B A T T E R Y C H A R G E R  
4
Indicator lights  
Caring for your  
Battery Charger  
Solid red indicates that the smartphone  
battery is being charged.  
Solid green indicates that the smartphone  
battery is charged.  
General information  
Use only the AC charger that came with  
your smartphone, a Palm® Vehicle  
Power Charger, or another power supply  
approved by Palm.  
Solid yellow indicates that the battery  
being charged has become too hot or too  
cold to safely charge. Move the Battery  
Charger to a location that is at room  
temperature.  
CAUTION Use only power supplies  
approved by Palm. Unapproved power  
supplies could damage the Battery Charger  
or the battery being charged and may  
cause personal injury.  
Flashing yellow indicates a damaged  
smartphone battery or a power–supply  
error.  
CAUTION If the indicator light is flashing  
yellow, immediately disconnect your  
Battery Charger. Be sure you are using a  
functional Palm smartphone battery as well  
as a functional Palm charger.  
Don’t use the Battery Charger in areas  
where sparks could pose a hazard.  
Don’t let the Battery Chargers metal  
contacts or electrical socket come in  
contact with metal objects.  
NOTE For additional troubleshooting  
information about your Battery Charger, go  
Don’t expose the Battery Charger or  
your spare batteries to rain or other  
liquids.  
Avoid using the Battery Charger at high  
temperatures (above 65°C/149°F), such  
as in a hot vehicle or in direct sunlight.  
C A R I N G F O R Y O U R B A T T E R Y C H A R G E R  
5
Keep the metal contacts and the  
electrical socket on the Battery Charger  
clean and free from debris that could  
obstruct charging or could cause a short  
circuit.  
Never dispose of a battery by  
incineration.  
CAUTION Burning a battery may cause an  
explosion and personal injury.  
Be sure to dispose of your battery in an  
environmentally responsible and legal  
way.  
Battery safety and disposal information  
Keep the metal contacts on the battery  
clean.  
NOTE In some areas, the disposal of  
batteries in household or business trash  
may be prohibited. For battery disposal  
instructions, visit www.palm.com/  
Don’t attempt to disassemble or  
short-circuit the battery.  
CAUTION To avoid being burned, do not  
handle a damaged or leaking lithium-ion  
(Li-ion) battery.  
C A R I N G F O R Y O U R B A T T E R Y C H A R G E R  
6
IMPORTANT Changes or modifications not covered in this manual  
must be approved in writing by the manufacturers Regulatory  
Engineering Department. Changes or modifications made without  
written approval may void the users authority to operate this  
equipment.  
Important safety and  
legal information  
Responsible party:  
FCC statement  
Palm, Inc.  
This device complies with part 15 of the FCC rules. Operation is  
subject to the following two conditions: (1) This device may not cause  
harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
950 W. Maude Avenue  
Sunnyvale, CA 94085-2801  
United States of America  
(408) 617-7000  
This equipment has been tested and found to comply with the limits  
for a Class B digital device, pursuant to Part 15 of the FCC rules.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment  
generates, uses, and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
Battery Charger  
Tested to Comply  
With FCC Standard  
FOR HOME OR OFFICE USE  
Canadian ICES-003 statement  
Reorient or relocate the receiving antenna.  
This Class B digital apparatus meets all requirements of the Canadian  
Interference-Causing Equipment Regulations. Operation is subject to  
the following two conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Cet appareil numérique de la classe B respecte toutes les exigences  
du Réglement sur le matériel brouilleur du Canada. Son utilisation est  
sujette aux deux conditions suivantes: (1) Cet appareil ne doit pas  
produire d’interférences nuisibles et (2) il doit pouvoir supporter toute  
interférence reçue, même si ces interférences perturbent son  
fonctionnement.  
The use of shielded I/O cables is required when connecting this  
equipment to any and all optional peripheral or host devices. Failure  
to do so may violate FCC rules.  
I M P O R T A N T S A F E T Y A N D L E G A L I N F O R M A T I O N  
7
Devices that you carry with you, such as your Palm device, build up  
ESD in a unique way because the static electricity that may have built  
up on your body is automatically passed to the device. Then, when  
the device is connected to another device such as a docking station, a  
discharge event can occur.  
CE compliance statement  
This product was tested by Palm, Inc. and found to comply with all  
the requirements of the EMC Directive 89/336/EEC as amended.  
Palm Take Back and Recycling Program  
Precautions against ESD Make sure to discharge any built-up static  
electricity from yourself and your electronic devices before touching  
an electronic device or connecting one device to another. The  
recommendation from Palm is that you take this precaution before  
connecting your Palm device to your computer, placing a device in a  
cradle, or connecting it to any other device. You can do this in many  
ways, including the following:  
This symbol indicates that Palm products should be  
recycled and not be disposed of in unsorted municipal  
waste. Palm products should be sent to a facility that  
properly recycles electrical and electronic equipment.  
For information on environmental programs visit:  
As part of Palm's corporate commitment to be a good steward of the  
environment, we strive to use environmentally friendly materials,  
reduce waste, and develop the highest standards in electronics  
recycling. Our recycling program keeps Palm handheld devices,  
smartphones, and mobile companions out of landfills through  
evaluation and disposition for reuse and recycling.  
Ground yourself when you're holding your device by  
simultaneously touching a metal surface that is at earth ground.  
For example, if your computer has a metal case and is plugged  
into a standard three-prong grounded outlet, touching the case  
should discharge the ESD on your body.  
Increase the relative humidity of your environment.  
Palm customers may participate in the recycling program free of  
charge. Visit palm.com/recycle for additional details and information  
about how you can help reduce electronic waste.  
Install ESD-specific prevention items, such as grounding mats.  
Conditions that enhance ESD occurrences Conditions that can  
contribute to the buildup of static electricity in the environment  
include the following:  
Static Electricity, ESD, and Your Palm Device  
Description of ESD Static electricity is an electrical charge caused by  
the buildup of excess electrons on the surface of a material. To most  
people, static electricity and ESD are nothing more than annoyances.  
For example, after walking over a carpet while scuffing your feet,  
building up electrons on your body, you may get a shock—the  
discharge event—when you touch a metal doorknob. This little shock  
discharges the built-up static electricity.  
Low relative humidity.  
Material type. (The type of material gathering the charge. For  
example, synthetics are more prone to static buildup than natural  
fibers like cotton.)  
The rapidity with which you touch, connect, or disconnect  
electronic devices.  
ESD-susceptible equipment Even a small amount of ESD can harm  
circuitry, so when working with electronic devices, take measures to  
help protect your electronic devices, including your Palm® device,  
from ESD harm. While Palm has built protections against ESD into its  
products, ESD unfortunately exists and, unless neutralized, could  
build up to levels that could harm your equipment. Any electronic  
device that contains an external entry point for plugging in anything  
from cables to docking stations is susceptible to entry of ESD.  
While you should always take appropriate precautions to discharge  
static electricity, if you are in an environment where you notice ESD  
events, you may want to take extra precautions to protect your  
electronic equipment against ESD.  
I M P O R T A N T S A F E T Y A N D L E G A L I N F O R M A T I O N  
8

Transcend Information StoreJet TS320GSJ25C User Manual
Toshiba HDD1744 User Manual
Sony MSAC M2 User Manual
Sony DVP S500D User Manual
Samsung SCH A670 User Manual
Samsung GT S3100 User Manual
Samsung FLEX MUXONENAND KFKAGH6Q4M User Manual
Philips SPE2020 User Manual
Philips 655 User Manual
Oregon Scientific RM383PA User Manual